Publicité
Les langues disponibles
Les langues disponibles
YOUR HEATER IS EQUIPPED WITH A THERMOSTAT:
1. Turn the unit on by turning the thermostat dial away from the OFF position.
2. For faster heat up or to increase the heat output, turn the Thermostat Control knob all the way to the right [MAX].
The thermostat function controls the temperature output. To decrease the heat output, turn the knob counter
clockwise.
3. Once the room reaches the desired temperature, slowly turn the Thermostat Control knob counter clockwise until
you hear a "click". This sets the heater to cycle ON/OFF to maintain the desired heating temperature for energy
efficiency.
4. To completely shut unit OFF, turn the thermostat dial to the OFF position and unplug the heater.
Model Number
RONA SKU#
Power Supply
Power Consumption
Before any cleaning, make sure that:
1. The heater is turned OFF.
2. Disconnect power supply at source by removing plug from power outlet.
3. Your heater is now ready for cleaning.
Regular Cleaning:
1. Do not use cleaning liquid or other chemicals to spray on the unit.
2. Interior dust can often be removed by using a vacuum cleaner with a crevice tool attachment.
3. To clean enclosure, use a clean, soft and lightly damp cloth to gently wipe off the dirt from the surface of the unit.
Be sure not to wet the heating element and the switches. Allow the unit to dry completely before using it.
CAUTION: DO NOT ALLOW WATER TO RUN INTO THE INTERIOR OF THE HEATER AS THIS COULD CREATE
A FIRE OR ELECTRIC SHOCK HAZARD, DAMAGING THE UNIT.
1. Perform the cleaning procedures described in "Cleaning/Maintenance".
2. Wipe all parts to dry.
3. Pack the heater in a plastic bag and store it in a cool, dry place.
SPECIFICATIONS
PH-936M
97965003
240 volts AC, 60Hz
5600W
CLEANING AND MAINTENANCE
STORAGE
6
Publicité
