Palazzetti MX Série Notice D'utilisation Et D'entretien page 27

mX 78 and mX 86 models
1) Loosen the screws (A) and remove the bracket
(B) that fixes the refractory backrest (Fig. 21).
A
B
2) Extract the refractory backrest (c) pushing it
upwards paying attention to the bracket (D)
(Fig. 22).
C
D
004778431 - 18/09/2020
ITALIANO ENGLISH
Fig. 21
Fig. 22
DEUTSCH
3) Loosen the screws (E) and remove the bracket
(F) (Fig. 23).
F
4) Remove the elbow and the lateral refractory
(Fig. 24).
5) Proceed in the same way on the opposite side
(in the mX R and mX l models there are only
the elbow and the upper bracket (F - Fig. 23)
due to the presence of the side glass).
FRANÇAIS ESPAÑOL
E
Fig. 23
Fig. 24
27