Refractory Removal - Palazzetti MX Série Notice D'utilisation Et D'entretien

5.3.2 Refractory removal

mX 64 models
1) Loosen the screws (A) and remove the refrac-
tory block bracket (b) (Fig. 17).
B
2) Remove the side refractory being careful not
to damage it (Fig. 18).
3) Proceed in the same way on the opposite side
(in the mX R and mX l models the dimensions
of the refractory and the relative fixing brack-
et are reduced due to the presence of the side
glass).
26
4) Loosen the screws (c) and remove the refrac-
A
5) Extract the refractory backrest (E) pushing it
Fig. 17
Fig. 18
tory block bracket (D) (Fig. 19).
C
D
upwards paying attention to the bracket (F)
(Fig. 20).
E
F
004778431 - 18/09/2020
Fig. 19
Fig. 20