Gtech MULTI POWER FLOOR ATF049 Manuel D'utilisation page 41

Operation
You can use the Multi Power Floor straight
out of the box. The dusting brush can be
slotted onto the nozzle. The crevice tool is
stored inside the handle.
Power floor head assembly
To attach the powered floor head, remove
the nozzle by pulling gently on the green
locking ring until the nozzle comes free
from the body. The power must be off while
changing tools.
Push the button to switch the Multi Power
Floor on. Push again to switch off.
Take the powered floor head and attach it
to the extension floor tube. It will click
into place.
ENGLISH
41