Product Image/Scope Of Delivery; Product's Identification Label; Armrests Assembly And/Or Adjustment - Bischoff & Bischoff TSE-A Mode D'emploi

TSE-A
| Toilet seat raiser
3.2

Product image/scope of delivery

On receiving the goods, please check that all components have been delivered.
The package should contain the following components (Fig. 1 and 2):
Fig. 1

Toilet lid (1x)

Padded armrests (2x)

Toilet seat (1x)

Seat base (1x)
3.3

Product's identification label

The product's identification label (Fig. 3) is located on the rear tube
Manufacturer's logo
Manufacturer information
Date of manufacture
Model name
Catalogue number
Medical product in compliance
with EU Regulation 2017/745
CE mark
Read the User manual!
Maximum payload
Unique Device Identification (UDI)
Serial number
18
Fig. 2

Hand screw (4x)

Tubes (2x)

Adjusting screws (2x)
User manual (1x)
Packing

.
Fig. 3
4

Armrests assembly and/or adjustment

IMPORTANT!
Remove the armrests by following the instructions in reverse order.
Bischoff & Bischoff GmbH | 07.09.2020 - Revision: 1
TSE-A
Toilet seat raiser |
19