Publicité
Les langues disponibles
Les langues disponibles
OPERATION - General
The appliance is intended only
for domestic use,
not for professional use.
1. Fan blades
2. Fan housing
3. Motor housing
4. Oscillation button
5. Speed settings
6. Power cord and plug
7. Inner Pipe
8. Base
9. Fixing ring
10. Fixing cap
11. Closing strip
12. Screw and bolt sealing strip
OPERATION - Before first use
Remove the fan from the packaging.
OPERATION - Assembling the fan
1. Attach the rod to the bottom plate using the three screws.
2. Unscrew the locking ring (see figure 2A) from the shaft.
3. Fit the rear of the fan housing (2B) onto the motor-housing (2C), making sure that the openings are
aligned precisely with the lugs on the motor housing and that the grip is at the top.
4. Slide the locking ring (2A) onto the shaft, and screw it tight (clockwise).
5. Slide the fan blades (2-D) onto the shaft and screw the mounting cap (2-E) onto the shaft (counter
clockwise, in the direction of the arrow marked "TIGHT").
6. Now attach the closing strip (1-11) to the rear basket (2-B) by partially tightening the screw (1-12) on the
underside. Now subtly click the front basket into the closing strip against the rear basket and tighten the
screw (see figure 2-G) firmly. Tighten the screw with a Phillips screwdriver.
G
1
2
5
6
8
F
D
E
24
7
9
10
11
12
B
A
EN
4
3
C
Publicité
