Tripp-Lite ECO350UPS Manuel De L'utilisateur page 6

Quick Installation
If you experience LED/LCD issues when turning on your UPS, please refer to the table below:
Models
ECO350UPS, ECO550UPS,
ECO650UPSM (1 LED)
ECO750UPS, ECO900UPSM
(3 LEDs)
ECO850LCD, ECO900LCDU2
(LCD Panel)
Optional Installation
Both UPS models include USB communication
ports and tel/DSL/Ethernet surge protection jacks
(not compatible with PoE applications). These
connections are optional, as the UPS will work
properly without these connections.
20-08-195-9338D5.indb 6 20-08-195-9338D5.indb 6
(All Models)
Problem
The PROTECTED LED does
not illuminate when the UPS
is turned ON.
The PROTECTED LED does
not illuminate when the UPS
is turned ON.
The LCD panel does not
illuminate for 20 seconds
when the UPS is first turned
on.
6
Solution (All Models)
1. Make sure the UPS is
plugged into a live AC outlet.
2. Press and hold the power
button to turn on the UPS. A
beep should sound when the
UPS starts.
3. If the UPS still does not
start, contact Tripp Lite Tech
Support for assistance.
9/1/2020 1:28:43 PM 9/1/2020 1:28:43 PM