Celestron AstroMaster 114AZ Guide De Démarrage Rapide page 2

10
Loosen the setscrew on the focuser. Remove the plastic cap
covering the end of the focuser.
13
On/Off
Switch
Remove the small plastic tab under the battery cover by pulling it
straight out. For longer battery life, be sure to turn off fi nderscope
when not in use.
BONUS SOFTWARE INCLUDED
Enhance your astronomy experience by downloading our free software for PC and Mac plus our free SkyPortal planetarium app for iOS and Android.
11
Insert the barrel of the 20mm eyepiece into the focuser and tighten
the setscrew.
14
Battery
Cover
Remove the lens cap from the front of the telescope before you
begin observing.
MINIMUM SYSTEM REQUIREMENTS
Windows:
- Windows 7 or higher
- 500 MHz or higher processor
- 128 MB RAM
- 850 MB of hard disk space
- 32 MB OpenGL capable graphics card
- Minimum recommended monitor resolution of 1024 x 768 pixels.
Android: Version 4.0 and higher
12
Loosen the two Philips-head screws on the side of the fi nderscope
and slide the clamp over the fi nderscope bracket. Secure the fi nder-
scope in place by tightening the two Philips-head screws.
15
You are now ready to use your AstroMaster telescope.
Mac:
- Universal Binary (PPC/Intel compatible)
- OS X 10.4 or higher (10.5 or higher)
- G3 450 MHz or higher processor
- 128 MB RAM
- 850 MB of hard disk space
- 32 MB OpenGL capable graphics card
- Minimum recommended monitor resolution of 1024 x 768 pixels.
Apple: iOS 4.3 and higher