Domo LINEA 2000 DO3025 Mode D'emploi page 37

PARTS
1. Observation window
2. Glass tray
3. Safety interlock system
4. Turntable shaft
5. Turntable ring assembly
6. Control panel
BEFORE THE FIRST USE
· Remove all packaging material and accessories.
· Clean the appliance in accordance with the 'cleaning and maintenance' instructions.
TURNTABLE INSTALLATION
· First place the turntable ring in the middle of the microwave
oven.
· Place the turntable on the ring. Make sure that the middle of
the turntable fits into the turntable shaft.
CAUTION:
· Never place the glass tray upside down. The glass tray should never be restricted.
· Both glass tray and turntable ring assembly must always be used during cooking.
· All food and containers should be placed onto the glass turntable during cooking at all
times.
· If the glass tray or turntable ring assembly cracks or breaks, contact your nearest
authorized service center.
INSTALLATION
· Check the oven for any damage, such as dents or a damaged door. Do not use the oven
if it is damaged. Remove the protective film around the machine, this is applied to avoid
scratches.
· Choose a place to install the microwave, where there is sufficient open space for the air
intake and exhaust.
The microwave oven must stand at least 85 cm high.
Make sure that the left, right and back side are at least 10 cm from the wall or cupboard.
www.domo-elektro.be
2
1
4
3
5
6
37
DO3025