Twin-Star International KC2517-E451-42 Manuel D'instruction page 6

2. Crew 2 caster (II) and 2 caster (JJ) with screw (MM)
on the base, use Phillips head screwdriver to tighten
the screws.
Hardware Used
II
Caster
Caster
JJ
(with stopper)
MM Screw
3. Insert one Wood Dowel (CC) into each of the
pre-drilled holes in the underside of Top (G) and lay
fi nished side up on top of completed assembly 2.
From the inside, attach the top (G) using Hex Screw
(EE) and Washers (BB) through the pre-drilled holes
in the mounting blocks.
Hardware Used
BB
Flat Washer
CC Wood Dowel
EE
Hex screw
4. Choose desired height of Interior wood shelves (H)
and place the Shelf Pins (GG) into same height shelf
holes inside side panels. Insert Wood Shelves (H),
allow Wood Shelves (H) to rest on the Shelf Pin
(GG), use Screws (LL) to fi x the shelves.
Hardware Used
GG
Shelf Pin
LL
Screw
Fig. 2
x 2
x 2
x 16
Fig. 3
x 6
x 6
x 6
Fig. 4
x 8
x 8
5
JJ
MM
II
G
CC
H
GG
LL
JJ
CC
BB
EE