Twin-Star International KC2517-E451-42 Manuel D'instruction page 5

SAFETY INFORMATION
WARNING
• Before assembly, carefully use scissors or utility knife to cut and unwrap all parts.
Make sure you do not discard the hardware.
CAUTION
• Use care in assembling your new kitchen cart. Take your time and use the
hardware provided and a quality Phillips head screwdriver. Never overtighten bolts.
• Do not sit on any part of the kitchen cart.
• All panels are labeled left and right as viewed from the front of unit.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and diagram above. If any part is missing or damaged, do not attempt to
assemble, install or operate the product. Contact customer service for replacement parts.
Estimated Assembly Time: 60 Minutes
Tools Required for Assembly (not included): Phillips head screwdriver, scissors and utility knife
ASSEMBLY INSTRUCTIONS
1. Insert wood dowels (CC) into the holes in the Base
(A) and insert Nut (NN) into the bottom of panels
(D, E, F). Push the Left / Right side panels (E, F),
middle divided panel (D) snug to the Base as shown
in diagram. Screw Hex screw (AA) into Flat Washer
(BB) with Allen Key (DD) through the base to
connect them, make sure the them screw in the
nuts.
Hardware Used
AA Hex screw
BB
Flat Washer
CC Wood Dowel
Allen Key
DD
Nut
NN
Fig. 1
D
E
x 8
x 8
x 6
x 1
x 8
4
CC
NN
F
BB
AA
A
DD