Powerworks XB BAP701 Manuel D'opérateur page 5

4 PROPOSITION 65
WARNING
This product contains a chemical known to the state of
California to cause cancer, birth defects or other
reproductive harm. Some dust created by power sanding,
sawing, grinding, drilling, and other construction activities
contains chemicals known to cause cancer, birth defects or
other reproductive harm. Some examples of these chemicals
are:
• Lead from lead-based paints;
• Crystalline silica from bricks and cement and other
masonry products;
• Arsenic and chromium from chemically treated lumber.
Your risk of exposure to these chemicals varies depending
on how often you do this type of work. To reduce your
exposure to these chemicals, work in a well-ventilated area,
and work with approved safety equipment, such as dust
masks that are specially designed to filter out microscopic
particles.
5 OPERATION
5.1 CHECK BATTERY CAPACITY
Press the battery capacity indicator (BCI) button. The lights
will illuminate according to the batteries capacity level. See
chart below:
1
Lights Capacity
3 Green Lights The battery is at 80-100%capacity.
2 Green Lights The battery is at 50-80% capacity.
1 Solid Green The battery is at 20-50% capacity.
Light
1 Blinking Green The battery is at 10-20% capacity.
Light
The battery is under 10% capacity and
Lights go out
requires charging immediately
1
Lights Capacity
4 Green Lights The battery is at 80-100%capacity.
3 Green Lights The battery is at 65-80% capacity.
2 Green Lights The battery is at 45-65% capacity.
1 Green Light The battery is at 20-45% capacity.
English
1 Blinking Green
Light
Lights go out
* 1. BATTERY CAPACITY INDICATOR (BCI) BUTTON
2. LIGHT METRE
3. BATTERY METRE
BATTERY PROTECTION FEATURES
This lithium-ion battery packs are designed with features that
protect the lithium-ion cells and maximize battery life.
If the tool stops during use, release the trigger to reset and
resume operation. If the tool still does not work, the battery
needs to be recharged.
COLD WEATHER OPERATION
The lithium-ion battery pack can be used in temperatures
down to -14°C (6.8°F). Put the battery pack on a tool and use
the tool in a light duty application. After about a minute, the
pack will warm up and begin operating normally.
6
Model
Battery
Voltage per cell
2
Cell number
3
Charge time
Model
Battery
Voltage per cell
Cell number
Charge time
2
Model
Battery
Voltage per cell
Cell number
5
The battery is at 10-20% capacity.
The battery is under 10% capacity and
requires charging immediately
TECHNICAL DATA
BAP701
18V 1.5AH, 30.0Wh 20V MAX
3.6V
5
180min. (use CAP803 Charger)
45min. (use CAP802 Charger)
22.5min. (use CAP801 Charger)
BAP702
18V 2.0AH, 40.0Wh 20V MAX
3.6V
5
4H (use CAP803 Charger)
60min. (use CAP802 Charger)
30min. (use CAP801 Charger)
BAP703 / BAP708
18V 4.0AH, 80.0Wh 20V MAX
36V 2.0AH, 80.0Wh 40V MAX
3.6V
10
EN