Publicité
Les langues disponibles
Les langues disponibles
3. Use of the Oven
3.1 Display description (full touch double cavıty)
CAVITY: When the separator is placed inside the oven, you can select the lower or upper cavity by
pressing the
button.
When you select a cavity, you need to set the desired cooking function by pressing the F key and
then press SELECT to confirm the choice.
It is now possible to set the cooking temperature by pressing the " <" and ">" keys, confirming your
selection by pressing SELECT. Following this procedure the oven starts to cook.
If you want to use the oven as a single cavity one, you have to remove the separator.
Press F to select the desired cooking function and confirm by pressing SELECT. Set the temperature
by pressing the "<" and ">" keys and confirm the selection by pressing SELECT. Following this
procedure the oven starts to cook.
NOTE: when a cavity is selected, all the information relating to cooking functions, temperature and
time refer to the cavity that was selected previously.
ON/OFF: The oven is switched on and off with this button
EXTRA: If the oven is switched off, the display shows the clock. When the oven is inactive, all
the functions are available except the cooking duration and end of cooking.
If the clock is not set, the oven does not work: the display flashes, showing "12:00"
and the only functioning key is Extra. From the Extra key, the following functions can be set:
1 2 3 4 5 6 7
1. On/Off
2. Extra Functions
3. Arrow (-)
4. Select/Stop
5. Arrow (+)
6. Cavity
7. Cooking functions
GB 10
Publicité
