MSI 915P/G Combo2 Mode D'emploi page 6

Specifications
CPU
l
Supports Intel Pentium 4 Prescott LGA775 processors in LGA775 package.
l
Supports up to Pentium 4 3XX, 5XX, 6XX (EM64T) sequence processor or higher speed.
l
Supports Intel Hyper-Threading Technology.
l Supports Intel new technology "EIST".
l
For the latest information about CPU, please visit
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support.php
Chipset
l Intel 915P/G chipset
- Supports FSB 533/ 800 MHz.
- Supports PCI Express x 16/ x 1 interface.
- Supports DDR333/ DDR400 or DDR2 533/ DDR2 400 memory interface.
- Integrated graphics controller. (for 915G only).
l Intel ICH6 chipset
- Hi-Speed USB (USB2.0) controller, 480Mb/sec, 8 ports.
- 4 Serial ATA ports with transfer rate up to 1.5Gb/s.
- 1 channel Ultra ATA 66/100 bus Master IDE controller.
- PCI Master v2.3, I/O APIC.
- Supports both ACPI and legacy APM power management.
Main Memory
l Supports two unbuffered/non-ECC DIMM of 2.5 Volt DDR 400/ 333 SDRAM.
l Supports two unbuffered DIMM of 1.8 Volt DDR2 533/ 400 SDRAM.
l Supports up to 2GB memory size DDR memory or DDR2 memory.
l Supports dual channel DDR or DDR2.
(For the updated supporting memory modules, please visit
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_trp_list.php )
Slots
l One PCI Express x16 slot (supports PCI Express Bus specification v1.0a compliant).
l One PCI Express x1 slot (supports PCI Express Bus specification v1.0a compliant).
l Three PCI 2.3 32-bit PCI bus slots (support 3.3v/5v PCI bus interface).
On-Board IDE
l One Ultra DMA 66/100 IDE controller integrated in ICH6.
- Supports PIO, Bus Master operation modes
- Can connect up to two Ultra ATA drives.
l Serial ATA/150 controller integrated in ICH6
- Up to 150MB/sec transfer speeds.
- Can connect up to four Serial ATA drives.
2