MSI 915P/G Combo2 Mode D'emploi page 12

MSI Reminds You...
Always consult the vendors for proper CPU cooling fan.
Serial Port Connector: JCOM1
The mainboard provides one serial port header for you to
connect secondary serial devices.
Front Panel Connectors: JFP1/JFP2
The mainboard provides two front panel connectors for
electrical connection to the front panel switches and LEDs.
JFP1 is compliant with Intel Front Panel I/O Connectivity
Design Guide.
Front Panel Audio Connector: JAUD1
The front panel audio connector allows you to
connect to the front panel audio and is compliant
®
with Intel Front Panel I/O Connectivity Design
Guide.
MSI Reminds You...
If you do not want to connect to the front audio header, pins 5 & 6, 9 & 10 have to be jumpered in
order to have signal output directed to the rear audio ports. Otherwise, the Line-Out connector on
the back panel will not function.
Front USB Connector: JUSB1/ JUSB2
The mainboard provides two standard USB 2.0 pin headers
JUSB1 & JUSB2. USB2.0 technology increases data
transfer rate up to a maximum throughput of 480Mbps,
which is 40 times faster than USB 1.1, and is ideal for
connecting high-speed USB interface peripherals such as
USB HDD, digital cameras, MP3 players, printers, modems
and the like.
MSI Reminds You...
Please note that the pins of VCC & GND must be connected correctly, or it may cause some
damage.
(2)AUD_GND
(1)AUD_MIC
9
1
10
2
8
DTR
[2]SIN
SOUT
Power Power
LED Switch
2
1
HDD Reset
LED Switch
JFP1
AUD_RET_R
Key
AUD_VCC
HP_ON
AUD_MIC_BIAS
AUD_FPOUT_R
USB1+
USB1-
(2)VCC
(1)VCC
USB0-
USB0+
CTS
DSR
RI[9]
GND
RTS
Speaker
10
2 8
9
1 7
Power
LED
JFP 2
AUD_RET_L(10)
AUD_FPOUT_L(9)
GND
USB0C(10)
Key(9)
GND