Télécharger Imprimer la page

BGS technic 803867862 - 62 Mode D'emploi page 4

Cric rouleur hydraulique, 3,0 t

Publicité

Les langues disponibles

Les langues disponibles

SPECIFICATIONS
Maximum lifting capacity: 3000 kg
Minimum height: 130 mm
Maximum height: 465 mm
Length: 540 mm
Width: 330 mm
Weight: 27.7 kg
SAFETY ADVICE
• Read, study, and understand all warnings and operating instructions prior to use
• Do not overload this jack beyond the rated capacity.
• This jack is designed for use only on hard level surfaces capable of sustaining the load. Use on
other than hard level surfaces can result in jack instability and possible loss of load.
• This is a lifting device only. immediately after lifting, support the vehicle with jack stands
• Do not get under or allow anyone under the vehicle, until it has been supported by jack stands.
• Do not move or dolly the vehicle while on the jack.
• Lift only on areas of the vehicle as specified by the vehicle manufacturer.
• Center load on saddle prior to lifting.
• No alterations to the jack shall be made.
• Failure to heed these warnings may result in personal injury and / or property damage.
• Inspect before each use. Because of the potential hazards associated with the misues of
equipment of this type, no alterations shall be made to the product without written authorization
of the manufacturer or supplier.
OPERATION
The owner and/or operator is responsible for providing maintenance, maintaining all decals or
warning labels and while in use, maintaining the unit in good work order.
Read all warnings and instructions. Make sure that the operator comprehends its contents. Safety
information shall be emphasized and understood prior to usage.
The jack shall be inspected per the instruction manual prior to use. It is the owner and/or
operators responsibility to study all WARNINGS, operating, and maintenance instructions
contained on the product label and instruction manual prior to operation of this unit, The
owner/operators shall retain product instructions for future reference.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Hydraulic Floor Jack 3.0 T
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 9255
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed

Publicité

loading

Ce manuel est également adapté pour:

9255