Ego Power+ LM2100SP-FC Guide D'utilisation page 44

REPLACING THE TRAILING SHIELD
WARNING:
mower.
WARNING:
working. Never operate the mower with damaged safety devices. Failure to do so can
result in personal injury. The trailing shield is subject to wear and damage, which could
expose moving parts or allow objects to be thrown. For safety protection, frequently
check the trailing shield and replace it immediately with only the identical replacement
part, listed in this manual.
1. Remove the battery.
2. Turn the mower on its side with the upper surface against a wall.
3. Remove the rear wheel on the top side, following the section "REPLACING THE
WHEELS" in this manual.
4. For self propel mower
LM2100SP/LM2100SP-FC, loosen
the wheel cover locking screw,
then remove the wheel cover
from the wheel shaft
(Fig. 34).
44
56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2100SP/LM2100SP-FC/LM2100/LM2100-FC
Always remove the battery pack when servicing or transporting the
Never operate the mower unless the trailing shield is in place and
34
Wheel Cover
Locking Screw
Wheel Axle