Publicité
Les langues disponibles
Les langues disponibles
REPLACING THE WHEELS
(Fig. 33a, 33b, 33c & 33d)
WARNING:
the battery pack when servicing or
transporting the mower.
1. Turn the mower on its side with the
upper surface against a wall.
2. Use a flat blade screwdriver to pry
the dust cover away from the wheel.
3. Use an adjustable or 1/2 inch
(13mm) wrench to turn the bolt
counterclockwise to loosen it.
4. Remove the bolt, the worn wheel
and the wave washer from the
wheel axle.
Note: When replacing the rear wheel for
the self propelled mower (LM2100SP/
LM2100SP-FC), remove the drive gear
from the worn wheel and assemble to the
new wheel with the 3 screws.
42
56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2100SP/LM2100SP-FC/LM2100/LM2100-FC
Always remove
33a
Front wheel for LM2100SP/LM2100SP-FC/
LM2100/LM2100-FC
33b
Rear Wheel
Drive Gear
Wave Washer
Rear wheel for LM2100SP/LM2100SP-FC
33c
Rear wheel for LM2100/LM2100-FC
Dust Cover
Bolt
Round Recess
facing outside
Front Wheel
Wave Washer
Wheel Axle
Dust Cover
Bolt
Round Recess
facing outside
Screw
Wheel Axle
Dust Cover
Bolt
Round Recess
facing outside
Rear Wheel
Wave Washer
Wheel Axle
Publicité
