Klarstein WONDERWALL AIR 96 Mode D'emploi page 20

EN
20
The flashing
ON/OFF symbol
indicates that the
heater is currently
controlled by a
program.
Display on System page when program is on-the-run
Weekly
program
In thermostat mode,
press [+] or [-].
Set the day of the week
for the end time (ET)
to +/-.
The flashing MODE symbol
indicates that the preset
program for slot 3 is currently
active.
Select the programme
position to be programmed
and confirm with [OK].
Press [+] or [-] and confirm the
target temperature with [OK].
Set the exact start time
(hour and minutes) with
+/-.
Slot
program
Set the day of the week
for the start time (ST)
with +/-.