Operating Notes - AKG Acoustics C 477 Mode D'emploi

3 Interfacing
Important!
3.2 C 477 WR oc
Fig. 2: C 477 oc
circuit diagram.

4 Operating Notes

Important!
Important!
10
If the selected input provides no phantom power:
1. Connect the MPA III to one of the phantom power supplies listed
above.
2. Connect the phantom power supply to the desired input.
Using any power supply other than those recommended by
AKG may damage your microphone and will void the warranty.
The C 477 WR oc uses a connecting cable with stripped and tinned leads.
You can use this microphone with bodypack transmitters or other devices
that provide a supply voltage between 1.5 VDC and 12 VDC.
For details on the type of connector you will need, refer to the instruc-
tion manual of the device to which you want to connect your micro-
phone.
The clear-plastic moisture shield on the microphone prevents
perspiration or makeup from clogging the sound entry ports
and thus changing the sound and reducing the microphone's
sensitivity.
Therefore, never try to remove the moisture shield from the
microphone!
The headband and microphone arm are made of thin-walled
tubing. Bend these parts with extreme caution. If you bend the
tubing too sharply it may break, which will void the warranty.