Publicité
Before starting read these instructions carefully. We suggest you carry out assembly on a soft surface so as to avoid scratching
the paint. Please note that because of the nature of cast metal, you may find roughness on the surface and the design. This
"one of a kind" look enhances the beauty of the product and is not a defect. Remember cast iron is fragile and will crack easily
so do not drop the top and bottom bowls, handle with care.
Lay out and identify all the components
1.
Please separate the bolts and nuts by size before starting the assembly.
When assembling nuts and bolts make sure the spring lock washer is next to nut and the flat washer is next to the spring
washer.
Assemble Legs (E) to Bowl (C) with the six M6 X 25 Bolts (T2), Washers (U1),Lock Washers (U2) and Nuts (V). Do
2.
not tighten the bolts, then assemble Legs (E) to Leg Ring (D) with the three M6 X 35 Bolts (T1),Washers
(U1),Lock Washers (U2) and Nuts (V).
3. Now tighten all fixings – do not over tighten
The assembly is now complete, position all parts as shown below and the Elidir Fire Bowl is ready for use.
DO NOT FULLY TIGHTEN THE BOLTS BEFORE ASSEMBLING ALL THE PARTS
Assembly is easier with two people, one to hold the parts and a second person to insert the fixings.
Tools required: screwdriver and socket wrench - spanner and forked poker supplied
Now check and tighten all fixings, assembly is complete.
DO NOT OVER TIGHTEN THE FIXINGS
Keep plastic bags out of the reach of children and dispose of safely.
Please read the safety recommendations before use.
Keep these instructions in safe place for future reference.
ASSEMBLY
Publicité
