Télécharger Imprimer la page

auna 10021769 Mode D'emploi page 10

Publicité

Les langues disponibles

Les langues disponibles

How to connect the device to power
Unpack the package, and connect the device on power with the adapter as below picture shows
Built-in battery management and charging
For the 1st use, please full charge the built-in battery.
You have to full charge the device before you use it for the fi rst time, and you can charge it with the DC
adapter in the package. For the fi rst 2 times, it will take about 6 hours for full charge, and it will only take
you 3 to 4 hours for full charge after that.
Remark:
This device comes with built-in li-battery, and you have to choose our standard DC adapter (output:
DC5V, 2A). If you charge the device when shut down, the battery icon will roll in green. If you charge the
device when it works, the small battery icon in bottom right will be in lightning shaped. When it is full
charged, the icon will turn all green, and stop rolling.
Remark:
1. If long time no use, you need to at least use it to release all of the power of the battery, and full
charged it before you put it away. In this way, to make the device much longer working life.
2. If the device shutdown because of battery's low power automatically, you need to wait for a little
while to restart up the device until the device charged enough.
3. If you keep the device working and charging at the same time, you need much longer for full
charge.
Power on/off
Power on: Long press Power on button for 3 to 6 seconds, the device will show start up mune. After
start up the device, the screen is defualt locked, you have to move the lock button with your fi nger to
unclock it.
Power off:
1. Long press Power on/off button, it will pop-up shut down botton on the screen.
2. Press "Confi rm",and the device will shut done.
Lock the screen: press power on/off button
Unlock the screen: press power on/off, and the screen will be the way when you start the devide.Then
what you need to do is the move the unlock botton with your fi nger, and the screen will be unclocked.
Remark: If the device is without enough power, the system will shutdown automatically.
10
10

Publicité

loading

Ce manuel est également adapté pour:

10021770