SOMFY Sonesse 40 PA Mode D'emploi page 8

5 Troubleshooting
The motor doesn't work:
Verify:
• The wiring of the motor.
• The power supply specifications.
• The heat generated (wait for the cooling of the motor).
The equipment stops too soon:
Verifiy:
• The operation of end-limits during the rotation of the motor.
• The crown is properly fitted to the tube.
• The end-limits of the motor are properly adjusted.
• That the shade is within the recommended weight limit.
The equipment is noisy:
Verify that:
• The wheel and the crown are well adapted to the used tube.
• The mechanical plays between motor, accessories, tube and end of tube must be
=:79:34:=&8"&8;:&#3P?#6#N
• The wheel is properly fixed to the tube.
• The equipment is not constrained between the brackets.
• The length of the notch is adapted to the motor hook or to the used crown.
• Debris, screws or other are not in your tube.
• The power supply specifications.
• The temperature of the environment is in conformity with the operating temperature.
6 Technical data
Power supply
Operating temperature
Protection rating
7 Environment
L3#3D:=& :>:789?7& C9"=6784& 35=& <388:9?:4& 4;"6>=& 5"8& <:& =?4C"4:=& "$& A?8;&
5"9#3>&;"64:;">=&A348:N
M3B:& 469:& 8"& =9"C& 8;:#&?5&4C:7?3>>%& C9"@?=:=&7"583?5:94& "9&38&35&368;"9?J:=&
"9D35?J38?"5&8;38&A?>>&:5469:&8;:%&39:&9:7%7>:=
8
230V/50Hz - 120V/60Hz - 220V/60Hz -
110V 50/60Hz
"C'0$0#"0C'0
DE0%%
!"#$%&'()*+*,-../,-.0*1"23$*1415*466*%&'()7*%878%98: