Beko CHP 30100 SS Manuel D'utilisation page 16

4 Installing your appliance
• Plug connector into the motor.
Fig. 1: Single motor installation (30" range hood
model only)
Install the grease filter and turn power on at
service panel.
Check operation of the hood.
If range hood does not operate:
• Check that the circuit breaker is not tripped or
the house fuse blown.
• Disconnect power supply. Check that wiring is
correct.
To get the most efficient use from your new range
hood, read the "Use and Care Information" section.
Keep your Installation Instructions and Use and
Care Guide close to range hood for easy reference.
16 / 62 EN
Fig. 2: Double motor installation (36", 42" & 48"
range hood models only)
Range Hood / User Manual
Attachment
screw
Spring clip