Flex ORE 150-3 Notice D'instruction D'origine page 15

ORE 150–3 / ORE 150–5
Using an external extraction system
Push extraction adapter all the way onto

the extraction nozzle.
Connect extraction hose to the extraction

adapter.
Connect extraction hose to the dust

extraction system.
Follow the operating instructions
for the dust extraction system!
NOTE
To prevent the power tool from sticking
to the surface of the workpiece, set the
suction power on the extractor to a corres-
pondingly low level.
Integrated extractor with microfilter box
Push microfilter box all the way onto

the extraction nozzle.
To ensure optimum dust extraction, empty
the microfilter box in good time!
Regularly clean filter element.
Pull microfilter box with a twisting

movement off the extraction nozzle.
Remove cover (bayonet lock) and pull

out together with the filter element.
Tap filter element on a solid surface.

Clean fins with a soft brush.
Empty housing of the microfilter box.

Re-attach microfilter box.

Number of oscillations control
The thumb wheel can be used to steplessly
vary the number of oscillations from 1 (low)
to 6 (high) even while the power tool
is running.
As a result, the grinding speed can
be optimally adjusted to the particularly
material and the working conditions.
Switching on and off
Switch on the power tool (without lock):
Press the switch.

Switch on the power tool (with lock):
Press the switch (1.).

Press locking button (2.) and release

switch.
15