Whirlpool Gold GU1200XTLB1 Guide D'utilisation Et D'entretien page 14

Cycle Selection Charts
Select the wash cycle and options desired. The dishwasher starts
filling once you press a cycle, unless you select a delay wash.
You can select an option as the machine is filling.
After a wash cycle, the dishwasher remembers the options used
and uses the same options in the next wash cycle unless new
options are selected or Cancel is selected.
A " " shows what steps are in each cycle. Your model may have
some or all of the cycles shown.
Display time is for models with the dual digit display on the
console.
Temperatures indicate where extra heat is added.
Water usage is shown in U.S. gallons/liters.
Use this cycle for all
day-to-day soil types,
including both normal
and heavy soils, giving
you exceptional
cleaning performance
combined with
reassuring sanitization.
Initial display time after
rotating clock pattern:
86-94 min
Pre- Main Rinse Rinse
Wash Wash
130°F 145°F
(54°C) (63°C)
Use this cycle for hard-
to-clean, heavily-soiled
pots, pans, casseroles,
and regular tableware.
Initial display time after
rotating clock pattern:
84-92 min
Pre- Main Rinse Rinse
Wash Wash
130°F 140°F
(54°C) (60°C)
14
Use both detergent
dispenser sections.
Final Dry Mini- Water
Heated mum Usage
Rinse Time (gal/L)
(min)
91* 6.9-10.4/
160°F Light 26.1-39.3
(71°C) soil
Use both detergent
dispenser sections.
Final Dry Mini- Water
Heated mum Usage
Rinse Time (gal/L)
(min)
89* 6.9-10.4/
140°F Light 26.1-39.3
(60°C) soil
Use this cycle for loads
with normal amounts of
food soil. (The energy-
usage label is based on
this cycle.) During the
main wash, the wash
action will repeatedly
pause for several
seconds.
Initial display time after
rotating clock pattern:
73-90 min
Pre- Main Purge Rinse
Wash Wash
120°F
(49°C)
Use this cycle for china
and crystal. This cycle
uses a light wash and
gentle dry. During the
heated dry, the heating
element cycles on and
off.
Initial display time after
rotating clock pattern:
65-73 min
Rinse Main Purge Rinse
Wash
120°F
(49°C)
Use this cycle for pre-
rinsed or lightly-soiled
loads. This cycle
automatically adds a fill
and brief pre-wash,
purging the hot water line
and improving wash
results, without adding
time for water heating
periods.
Initial display time after
rotating clock pattern:
42-46 min
First Fill Pre- Main Rinse
Water Wash Wash
Temp.
Greater
than
135°F
(57°C)
Use both detergent
dispenser sections.
Final Dry Mini-
Heated mum
Rinse Time
(min)
72*
140°F Light
(60°C) soil
Use main detergent
dispenser section.
Final Dry Mini-
Heated mum
Rinse Time
(min)
71*
135°F cycled
(57°C)
Use main detergent
dispenser section.
Rinse Final Dry Mini-
Heated mum
Rinse Time
(min)
44*
Water
Usage
(gal/L)
5.9-10.1/
22.3-38.2
Water
Usage
(gal/L)
5.9-8.4/
22.3-31.8
Water
Usage
(gal/L)
5.2-7.8/
19.7-29.5