Publicité
Les langues disponibles
Les langues disponibles
3
USE OF INDUCTION HOB
The ceramic hob is fitted with induction cooking zones.
These zones, shown by painted disks on the ceramic surface, are controlled by separate
knobs positioned on the control panel.
In the front central area of the hob, the cooking
zones display (composed by no. 4 luminous figures
- one for each zone) indicates:
= Cooking zone Off (not activated)
= Cooking zone On (activated but not operating).
If all the zones are in zero setting, the display switches off automatically
÷
= Power levels
= "Fast heating" function
= "Booster" function
= Remaining heat indicator
= Pan detection indicator
= Childlock safety
Note: each lit figure refers to the relevant cooking zone
INDUCTION COOKING SYSTEM
When your induction hob is switched on and a cooking zone has been selected, the
electronic circuits produce induced currents that instantaneously heat the bottom of the
pan which then transfers this heat to the food. Cooking takes place with hardly any energy
loss between the induction hob and the food.
Your induction hob operates only if a correct pan with the right features is placed on a
cooking zone. Please refer to COOKWARE FOR INDUCTION COOKING.
If the pan detection symbol
induction hob will not operate After 10 minutes without detecting any pan, the cooking zone
switches Off automatically and can only be switched On after the control knob has been
returned into "O" (Off) setting.
172
(cooking zones Off) after about 10 seconds.
appears on the display, your pan is not suitable and your
Fig. 3.1
Publicité
