Télécharger Imprimer la page

SEVERIN GS 8862 Mode D'emploi page 23

Congélateur armoire
Masquer les pouces Voir aussi pour GS 8862:

Publicité

Les langues disponibles

Les langues disponibles

1. Remove the screw covers on the lid of the
appliance. Loosen the screws and remove
the lid from the appliance.
2. Remove the hinge cover from the lid of
the appliance. Depending on the model,
insert the separately enclosed or the
freshly removed hinge cover on the
opposite side.
3. Loosen the screws from the hinge and
remove it. Lightly lift the door and
remove it.
4. Unscrew the bolt from the upper left side
of the appliance and screw it on the oppo-
site side.
5. Loosen the bolt from the hinge using a
screwdriver. Turn the hinge around and
replace the bolt. Set this hinge aside. You
will not need it again before step 11.
6. Disconnect the door bushing from the top
of the door and the hinge shroud from the
bottom of the door. Replace each on the
other side and tighten the hinge shroud.
(Lower part of the door)
7. Remove the adjustable feet of the
appliance. Loosen the screws on the
lower hinge and remove it.
8. Loosen the screw on the left side of the
appliance and replace it on the other side.
9. Loosen the screw on the lower hinge and
replace it on the other side.
Screw the hinge on the left side of the
appliance. Attach the feet back again.
10. Remove the hinge cover from the upper
right inside of the door and fix it onto the
left side.
- 23 -

Publicité

loading