Publicité
Les langues disponibles
Les langues disponibles
WARNINGS, PRECAUTIONS, NOTICES
• Warnings
No known warnings.
• Precautions
ScanBox
is provided in a non-sterile form. Clean
pro
the ScanBox
before and after each use. Please re-
pro
fer to the appropriate cleaning procedure to avoid
any health issue requiring medical attention.
Do not clean with household cleaning products.
The Phone support is not sterilizable and do not sub-
merge it in any liquid. Refer to the cleaning proce-
dure to avoid any contamination.
The following population should be assisted by a
third party in device use:
- children up to 12;
- visually impaired adults or children;
en
- hearing impaired adults or children;
- adults or children with any other condition that
might prevent the patient from adequately operat-
ing the device.
For patients with deciduous teeth, the guardian's
vigilance is required to ensure that deciduous teeth
do not fall out when placing the Cheek Retractor
Tube.
If your smartphone is not correctly held in position
when the jaw of the Phone support is tightened, do
not force, this could damage your smartphone or the
device. If you haven't already done it, remove the
protective cover from your phone and try again.
Do not use the ScanBox
pro
if it is broken.
• Notices
This is not a toy. Children should be supervised to
ensure that they do not play with the device.
INSTRUCTIONS BEFORE USE
Before use, you should wash your hands with soap
and water or hydroalcoholic gel. You must also clean
the ScanBox
and your smartphone (following its
pro
manufacturer's recommendations) before each use.
Refer to the cleaning procedure for the appropriate
steps to follow.
PAIRING UP THE PHONE SUPPORT WITH
YOUR PHONE
For the numbering below, please refer to the Phone
support operating procedure schematics.
Launch the application you want to use on your
phone before using the ScanBox
.
pro
10
11
Hold the Phone support with the jaw's engraved pad
facing you (1). Open the jaw by pressing the jaw's
opening button (2). Place your phone against the
fixed jaw and slide it horizontally to align the flash
and lens with the tube pairing hole (3).
Clamp the jaw onto your phone by pressing firmly on
the mobile jaw (4). Remove the protective cover of
your phone if necessary.
Make sure that your phone is held firmly (5).
Move your phone vertically so that the flash and lens
are in the tube pairing hole.
To do this, hold down the tuning button and move
the jaw vertically (6).
Release the tuning button when you are finished (7).
en
Publicité
