Franke FTLN I H45 X/BK Manuel D'utilisation page 11

4. CONTROLS
Key Key press
A Short
B Short
Long (leftmost
lines) when all
loads are
(motor and
lights)
C Short
D Short
Long press with
all loads off (mo-
tor and lights)
E Short
F Short
G Long press with
all loads off (mo-
tor and lights)
5. LIGHTING
• Please contact the Service Depart-
ment to change it ("Please contact
Function
Switches the hood on/off at the first speed.
Press or move your finger from left to right to increase the speed from
1 to 2, 3, Intensive.
The intensive speed is timed for 6 minutes. At the end of this time the
system automatically returns to the previously set speed.
Repeat the operation in reverse to decrease the speed (from right to
left).
Keypad Lock function
off
Activates/deactivates the keypad lock for hood cleaning.
Switches the lights on/off at maximum intensity.
Switches the lights on/off at medium intensity.
Performs a saturated Filters alarm reset.
24h Function
Activates/Deactivates the motor in the 24h Air Exchange mode, a
speed that allows suction of 10 minutes every hour, for a 24-hour
cycle.
Cannot be activated if the Intensive or Delay modes are active.
Delay Function
Activates/Deactivates the Delay function (automatic shutdown of the
Motor and of the lighting delayed by 30').
Cannot be activated with Intensive or 24h function.
Deactivate the function by pressing the same key or press the A key
for about 1 second to shut down the motor.
Activates/Deactivates the Activated Carbon Filters alarm.
Signals the saturated Metal Grease Filters alarm and the need to
wash them. The alarm is activated after 100 hours of effective hood
operation.
Signals the saturated Activated Carbon Odour Filter alarm. The
alarm is activated after 200 hours of effective hood operation.
the service department to purchase
it").
• Lamps in risk group 1 under IEC/
EN62471 at a distance of 20cm and
Display/Led
LED A remains stable.
The display shows 1.
The display shows the
selected speed.
If the Intensive speed is
selected the display
shows an animation.
All LEDs flashing
Fixed
Fixed
The display shows F 3
times, indicating that the
filter reset has been
completed.
LED A remains lit (fixed)
and LED E flashes. The
display shows an anim-
ation.
LED A remains lit (fixed)
and LED E lights up.
The display shows an
animation.
With the motor off, the
display shows F + 2
multiple times altern-
ately:
alarm activated.
With the motor off, the
display shows F + 0
multiple times altern-
ately:
alarm deactivated.
With the motor off, the
display shows F + 1
multiple times altern-
ately.
With the motor off, the
display shows F + 2
multiple times altern-
ately.
11