Publicité
Les langues disponibles
Les langues disponibles
48
Linear
Technical specifications
EN
Input impedance
47 kOhm
Maximum gain setting
+0 dB, +10 dB, +18 dB, +20 dB
switchable on bottom side
Analogue frequency
10 Hz (-0,3 dB) to 35 kHz (-1 dB)
response
Analogue S/N ratio
> 95 dB at +0 dB gain
Analogue THD
< 0,001 % at 6 mW/300 Ohm
Channel separation
> 70 dB/10 kHz
Power output
300 Ohm/200 mW
≠
60 Ohm/400 mW
≠
Output impedance
pre-out 60 Ohm
≠
phones out 5 Ohm
≠
Audio Connections
Neutrik headphone sockets with gold-plated contacts
≠
1 x pre-out
≠
2 x phones out
≠
gold-plated RCA sockets with teflon insulation
≠
Mains connections
230 V AC
Fuse
250 mA, Slo-Blo
Power consumption in
ca. 10 W through internal, regulated power supply
operation
Enclosure dimensions
280 mm x 110 mm x 44 mm
W x D x H
Weight
1,5 kg net
Accessories
Mounting kit
A mounting kit developed by Lehmannaudio is available at specialist retailers.
With this accessory the Linear can be mounted horizontally or vertically under
a table or on the wall. A suitable drilling template is included in the mounting
kit. This must only be used with the original mounting frames. The C-frames
should be screwed to the unit only with the countersunk bolts supplied with the
mounting kit.
Linear
49
EN
Publicité
