Uline H-8462 Instructions D'installation page 3

7. Insert legs into base. Secure each leg with two 4"
pins and two cotter pins. (See Figure 7)
NOTE: When legs are down, secure 4" pins and
cotter pins in first and third holes.
Figure 7
NOTE: When legs are folded, secure 4" pins
and cotter pins in first and second holes.
(See Figure 8)
Figure 8
4" Pins
8. Place hydraulic jack on upright and secure bottom
of jack with M16 x 90 mm bolt, M16 washer and
M16 hex locknut. Tighten with 15/16" socket.
(See Figure 9)
Figure 9
PAGE 3 OF 12
All manuals and user guides at all-guides.com
ASSEMBLY CONTINUED
9. Place boom on top of upright. Secure with
10. Raise hydraulic jack until top of hydraulic jack
Side
View
11. Slide boom extension into boom. Secure at preferred
M18 x 120 mm bolt, M18 washer and M18 hex
locknut. Tighten with 1⁄" socket. (See Figure 10)
Figure 10
aligns with boom. Secure with M16 x 90 mm bolt,
M16 washer and M16 hex locknut. Tighten with 15/16"
socket. (See Figure 11)
Figure 11
tonnage on boom with M16 x 90 mm bolt, M16
washer and M16 hex locknut. Tighten with 15/16"
socket. (See Figure 12)
Figure 12
NOTE: For instructions on how to raise/lower,
see Operation section on page 4.
0821 IH-8462