Uline H-8094 Mode D'emploi

π
H-8094
DELUXE HEAT GUN
WARNING! This product is a source of very high
temperature. As with any electrical tool always
follow safety precautions to reduce the risk of
fire, electric shock, or any other injury.
WARNING! With a heat gun, as with any other
electrical device, keep a fire extinguisher
handy and observe all sensible fire precautions.
Before performing any application, it is recommended
to experiment with a piece of scrap material.
1. Plug heat gun into properly rated outlet.
2. Turn switch to "II" position and the heat gun will have
full operating temperature in approximately two
minutes.
3. Adjustable stand is provided and allows nozzle to be
rotated from almost horizontal to vertical position.
PAGE 1 OF 6
All manuals and user guides at all-guides.com
1-800-295-5510
uline.com
SAFETY INSTRUCTIONS
1.
OPERATION
Keep the heat gun away from heat, rain, or moisture
exposure to reduce the risk of fire.
2. Do not direct the hot air stream to your clothing,
hands, or any other body parts.
3. Keep away from the reach of children.
4. Keep Nozzle face at least 1" away from shrink wrap
or from work surface.
5. Use heat gun in a well ventilated area.
4. To turn heat gun off after use, move switch to "I"
position. Run on cold for about three minutes. This
will allow the heat gun to cool down and the nozzle
become cool to the touch.
5. After the nozzle cools down, turn switch to "O"
position.
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
0919 IH-8094