SEVERIN CY 7106 Mode D'emploi page 14

2. Parquet nozzle
3. Crevice tool
4. Upholstery nozzle
5. Accessory bracket
∙ To always have the accessory to hand, clip the accessory holder to the suction tube and attach the crevice and upholstery
nozzle.
Vacuum cleaning
∙ Especially when vacuuming stairs, make sure that you are always above the appliance. Other-Vacuum cleaning wise the
appliance may fall down and cause injuries.
∙ When using of a brush with rotating bristles, keep it away from people, animals, plants, cables and lines at all times.
∙ Only use the appliance if the dust container and the filters have been correctly inserted.
∙ Assemble the appliance, plug into mains power and switch on the appliance.
∙ Follow the cleaning and maintenance instructions of the floor covering, carpet or furniture manufacturer!
∙ After using the appliance, switch it off and unplug from mains power.
∙ When you press the power cable retraction button, the power cable will be retracted into the appliance. Be sure to hold
the plug and guide it by hand towards the cable storage. Otherwise the cable could move around in an uncontrolled way
with a risk of injuring those nearby, causing a tripping hazard or damaging objects.
14
The parquet nozzle is suitable for cleaning hard floors with cracks and joints. For
optimal cleaning of crevices and joint gaps, the nozzle must be in full contact with the
floor. To pick up coarse dirt, it may be helpful to angle the nozzle slightly.
The crevice nozzle is suitable for cleaning joints, sofa cracks and other spaces that are
difficult to access.
The upholstery nozzle is suitable for vacuuming armchairs, sofas or other upholstery
fabrics.
∙ If curtains or other objects are accidentally suctioned, quickly open the slide vent to release the
objects again.