oventrop Regumat Notice D'installation Et D'utilisation page 5

2.2 Possible dangers at the installation
location
DANGER!
Suitable measures (e.g. safety valves) have
to be taken so that the maximum working
pressure and the maximum and minimum
temperatures are not exceeded or undercut.
WARNING!
The "Regumat" module distributor and the
pipework may get very hot during operation
and lead to bad scalding. Wear safety gloves
and inactivate the system before work com-
mences.
3 Transport, packaging and storage
Transport inspection:
Upon receipt, check delivery for any damages
caused during transit.
Any damages must be reported immediately upon
receipt.
4 Technical data
Size
max. working temperature
max. working pressure
Connections:
Heating circuit:
Heat generator:
Lateral connection:
Distance of connections to wall: 57mm
Materials:
Distributor:
Seals:
Insulation:
ATTENTION!
Suitable measure have to be taken so that
the max. working pressure and temperature
are not exceeded.
DN 25
120°C
PN 10 (20°C)
1
Collar nut G 1 ⁄
2
flat sealing
1
G 1 ⁄ male thread
2
flat sealing
3
G ⁄ female thread
4
Brass
EPDM
EPP
Dimensions / Connection dimensions:
Heating circuit I
Return Supply
125
Return
Head generator
Module distributor for 2 heating circuits
Heating circuit I Heating circuit II
Return Supply Return
125 125
Return
Head generator
Module distributor for 3 heating circuits
Flow chart:
Heating circuit II
Return Supply
125 125
375
570
Supply
Heating circuit III
Supply Return Supply
125 125 125
125
820
Supply
·
Flow rate V [l/s]
5