CAUTIONS & WARNINGS
WARNING
Turn off and disconnect the power before installation Installation should be performed by a qualified electrician in
accordance with all national and local electrical and construction codes and regulations
• DO NOT attempt to install or use this product until you have fully read and understand the installation instructions
contained in this user and installation guide and on the product safety labels Failure to follow the Fluence product
instructions and safety label advice may result in damage to the product, damage to property, or personal injury
Be sure to retain a copy of this user guide after installation for future reference
• Risk of Electrical Shock Turn off and disconnect the power before installing, moving, or cleaning to reduce the
possibility of serious injury DO NOT disconnect cables from the power supply or LED light bar while energized
• Only connect the system to an electrical outlet or circuit of appropriate type and rating for the cord and plug Connect
the system only to power sources of the correct voltages and frequencies listed in the product specifications
• Protect power cables from being pinched, walked on, or otherwise damaged
• Use a strain-relief or power cord grip if needed Maintain a minimum of 1" (2 5 cm) bend radius for all cables
• Use IP wet-rated junction boxes and fittings for the power cords equal to the IP rating of the rating of the lighting
system for the application
• DO NOT connect to live power until installation is complete and all connections are made
• DO NOT modify or alter the product; doing so will void the warranty Please refer to the Fluence Terms and
Conditions and Limited Warranty for further details
• LED and heatsink surfaces may be hot DO NOT touch while in operation Allow sufficient cooling time before
handling
• To reduce the risk of overheating or fire, never place operating fixtures face down on a flush surface Always allow
for adequate ventilation of fixtures and power supplies
12
WARNING
If installing the product using other
mounting hardware not included in
this manual, DO NOT install to the
two center light bars or to the
outer bars.