from the socket immediately. Take the entire device back to your supplier or a
recognised electrician to be checked and/or repaired. Always ask for original parts to
be used.
4.
The device may only be opened and/or repaired by a competent and qualified
person. Do not carry our your own repairs as this could be dangerous! Repairs carried
out by unauthorised persons or changes made to the device could damage the
dust/waterproof capacity of the device and will nullify the guarantee and the
manufacturer's liability.
5.
If the electrical cable is damaged, it must be replaced by the manufacturer, their
service department or somebody with similar qualifications in order to prevent
creating a hazard.
Failing to adhere to points 3, 4, 5, could lead to damage, fire and/or personal injury. They
will invalidate the guarantee and the supplier, importer and/or manufacturer shall not be
liable for the consequences.
Description
1. Thermostat dial
2. Mode selector dial
3. Dial oscillating function
4. Heating grill
5. Front panel
Location and connection
•
Remove all packaging material and keep out of reach of children. After removing
packaging, check the appliance for damage or other signs that could indicate a
fault/defect/malfunction. In case of doubt, do not use the appliance, but contact your
vendor for inspection or replacement.
•
Select a suitable location for the device taking into account all the
aforementioned warnings in this manual.
•
Check if the mode selector dial is set to 'OFF' (O).
•
Fully extend the power cord and plug into a suitable 220-240 V socket. To prevent the
circuit overloading, check that no other appliances are connected to the same group.
27