Product Overview (Fig. 1); Using The Appliance - Philips GC4880 Série Mode D'emploi

ENGLISH
6
Introduction
Congratulations on your purchase and welcome to Philips!
To fully benefit from the support that Philips offers,
register your product at www.philips.com/welcome.

Product overview (Fig. 1)

1 Spray nozzle
2 Water filling door
3 Spray button
4 Steam slider
a. Dry setting (
)
b. ECO setting ( ECO )
c. MAX setting (
5 Steam boost trigger
6 Safety auto-off light (specific types only)
7 Mains cord
8 Temperature indicator light
9 Water tank
10 Temperature dial
11 Calc clean button
12 Soleplate
13 Built-in calc container
14 Typeplate
Important
Read the separate important information leaflet and this user
manual carefully before you use the appliance. Keep both
documents for future reference.

Using the appliance

Note: The iron may give off some smoke when you use it for
the first time. This ceases after a short while.
Filling the water tank
Note: Your appliance has been designed to be used with
tap water. If you live in an area with hard water, fast scale
build-up may occur. Therefore, it is recommended to use
100% distilled or demineralized water to prolong the lifetime
of your appliance.
1 Open the water filling door.
2 Tilt the iron backwards and fill the water tank with tap
water up to the maximum level.
Note: Do not fill the water tank beyond the MAX indication.
)