SOGETRONIC VISION 2 SET WLD Manuel D'utilisation page 21

4. Choose the right Anti-skating force.
5. Remove the stylus protector from the stylus assembly.
Note: To avoid stylus damage, make certain the included stylus guard is in place
whenever the turntable is being moved or cleaned.
6. Open the tonearm clip from left to right.
7. Press the PLAY / STOP button once, the platter start turning.
8. Gently pull up the tonearm from its rest and move it over the record where play is
desired to begin. Use the Tonearm Lift Lever to raise the Tonearm Lift and let the tonearm
sit on it.
9. Set the Tonearm Lift Lever back to the down position, the tonearm will descend slowly
onto the record and begin playback.
10. When the record is finished playing , use the Tonearm Lift Lever to raise the tonearm
and then return it to the tonearm rest. To suspend the playback, repeat the same steps.
11. Press the PLAY / STOP button again, the platter stop turning.
Recording the LP into PC through USB jack
For installing and recording step please reference to the BRIEF INTRODUCTION OF
AUDACITY. http://audacity.sourceforge.net/
Recording the vinyl to your computer:
1). Follow the detail step as above Turntable Operation to play the vinyl.
2). Double click the Audacity and follow the record steps showing on the BRIEF
INTRODUCTION OF AUDACITY.
Audacity and USB Connection
It supports Windows95 / Window XP / Window 7 / Vista or more advanced version, with the
EMS memory more than 128MB and Audacity take space of 5MB.
Instruction for PC Encoding
Software instruction
1.1) Connect the USB cable with your turntable and your computer.
No extra driver is required.
1.2) Download the Audacity software from
Follow the instructions to complete installation.
3. Recording
2.1) Open the software
2.1) Choose "Edit" menu, then choose "Preferences";
http://audacity.sourceforge.net/
EN - 19 -