Quick HRC 1002 C00 Manuel D'installation Et D'emploi page 19

MAINTENANCE
The control panel does not require any particular maintenance. To assure top performance, check the cables and
electrical connections once a year.
Clean the instrument with a soft rag dampened in water. Do not use chemicals or harsh products to clean the chain
counter.
TECHNICAL DATA
MODELS
ELECTRICAL CHARACTERISTICS
Number of push-buttons
Current capacity of contacts (1)
Torch supply voltage (2)
Torch power absorption (2)
AMBIENT CHARACTERISTICS
Operating temperature
Protection rating (3)
CASE
Dimensions (W x H x D)
GENERAL CHARACTERISTICS
Maximum cable extension
EMC class
(1) On resistive load at 30 Vdc.
(2) Only on models HRC 1002 L - HRC 1004 L - HRC 1006 L - HRC 1008 L.
(3) With the plug correctly inserted into the socket. Excluding the area of the socket where the exit cable is fixed (IP 00).
QUICK ® RESERVES THE RIGHT TO MODIFY THE TECHNICAL CHARACTERISTICS OF THE EQUIPMENT AND THE CONTENTS OF THIS MANUAL WITHOUT PRIOR NOTICE.
HRC - REV005C
MAINTENANCE - TECHNICAL DATA
HRC 1002 HRC 1004
HRC 1002L HRC 1004L
2
HRC 1006
HRC 1006L
4 6
4 A
9 ÷ 32 Vdc
85 mA Max
from -15°C to +70°C
IP 67
62,2 x 185 x 49,4 mm
4,2 m
EN 55022/B
EN
HRC 1008
HRC 1008L
8