Télécharger Imprimer la page

Tele System TS SMV13 Guide Rapide page 9

Masquer les pouces Voir aussi pour TS SMV13:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
Incorrect antenna configuration can result in some or all channels not loading. we
recommend that you contact a professional installer for installation.
The Signal Level and Quality indicators refer to the selected satellite Trasponder on the
screen. Make sure that it is valid/updated and really active.
It is not recommended to avoid connecting the TV to the satellite signal via the via-the-radar
antenna connector (LNB Out/Loop Through) of an external satellite receiver because both
devices cannot operate at the same time.
In the case of a system with LNB SCR: each TV/receiver connected to the same system must
use a different SCR channel.
To connect multiple receiving devices to an SCR system, do not use the loop through
antenna connection of an external satellite receiver, but use a dedicated external signal
party.
1.4 Smart (Home) mode
The Home menu, also accessible directly from the Home button of the remote control,
allows you to access the following features:
-
Application management and use;
-
Navigation browser,
-
Selection of input sources/modes:
-
Access to the system settings
WARNINGS
To take advantage of SMART TV features, you need to connect your TV to the internet.
1.5 Factory reset (reset)
Resets all settings to the initial condition.
Accessible from the Home menu > Settings > Support > Reset to Factory Default > enter
PIN.
The user can keep the channel list with the personal preference/modification and /or the
FAVORITE list flagging the option before the restoring.
WARNING
Restoring factory settings clears all customizations made by the user, including stored
channels, downloaded applications, and changed settings. In addition, confirming the reset,
the TV will perform a full system restart, then display the first installation wizard on screen
1.6 E-Manual
The extended user manual is available in MENU > Setting > Support > E-Manual. The digital
version is reachable via QR code (on the top-right corner) for the reading or downloading on
your mobile device.
ENGLISH

Publicité

loading