Avaya Advanced 2330 Mode D'emploi page 18

English
Always wear an antistatic wrist strap connected to an ESD jack to prevent damage from
electrostatic discharge.
Follow these steps to install the Advanced Gateway 2330 in an equipment rack:
1. Attach a mounting bracket to each side of the router.
The following table illustrates mounting bracket position options for installing the
Advanced Gateway 2330 in an equipment rack.
Table 1: Mounting bracket position options for the Advanced Gateway 2330
2. Slide the switch into the rack. Insert and tighten the rack mount screws.
The Advanced Gateway 2330 has two internal, non-removable fans. Allow sufficient clearance
within and around the unit for maintenance and for proper airflow. Keep cable bundles clear
of the intake and exhaust vents.
18 Regulatory Information
All manuals and user guides at all-guides.com
Position
Front panel facing
operator
Rear panel facing
operator
Comments? infodev@avaya.com
Description
August 2013