U S I N G YO U R A I R P U R I F I E R
General Operation
1.
Press
to turn the air purifier on/off.
The air purifier fan will start automatically
at low speed.
2.
Optionally, press
speed. You can also select Auto or Sleep
Mode, or set a timer.
Note:
•
You can use the VeSync app to control
these functions, and more. For full
instructions, see the extended digital
manual (QR code on page 3).
•
For best results, run the air purifier at
high speed for 15–20 minutes before
using a lower speed or Auto Mode.
•
To effectively clean air, keep windows
closed while the air purifier is
operating.
Sleep Mode
Sleep Mode uses the lowest possible fan speed
to maintain a quiet environment.
•
Press
to turn Sleep Mode on/off.
•
Pressing
or
will also exit Sleep Mode.
Memory Function
When the air purifier is plugged in, it will
remember its programmed settings while
turned off and resume those settings when
turned back on.
Automatic Shutoff
As a safety feature, the air purifier will
automatically turn off if the back cover is
removed.
to increase fan
Auto Mode
Auto Mode uses the dust sensor inside
the air purifier to adjust the fan speed
automatically based on air quality. For
example, if the air quality is bad, the fan will
automatically be set to high speed.
•
Press
to turn Auto Mode on/off.
•
Pressing
or
will also exit Auto
Mode.
Auto Mode Chart
Colour
Air Quality
Red
Bad
Yellow
Moderate
Green
Good
Blue
Very Good
Timer
You can set a timer between 1–12 hours.
•
Press
repeatedly to choose a time
in increments of 1 hour. When you stop
pressing
, the display will flash 3 times
and the timer will start.
•
The air purifier will automatically turn off
once the timer is finished.
•
To cancel a timer, press
until the display reads "
3 times.
EN
Fan Speed
High
Medium
Low
Sleep Mode
repeatedly
-:--
" and flashes
9