Publicité
Les langues disponibles
Les langues disponibles
Operation
Setting Cooking Times, continued
Some recipes require different stages of cooking at different tempera-
tures. You can set multiple stages of cooking with your microwave.
Multi-stage Cooking
1
Follow steps 1 and 2 in the "One-Stage Cooking" section on the
previous page. The display shows "PRESS START OR ENTER
NEXT STAGE COOKING TIME".
When entering more than one cooking stage, the Power Level
button must be pressed before the second cooking stage can be
entered.
To set the power level at High for a stage of cooking, press the
Power Level button twice.
2
Use the Number buttons to set a second cooking time.
3
Press the Power Level button, then use the number buttons to set
the power level of the second stage of cooking. The display shows
the power level you have set and then "PRESS START OR ENTER
NEXT STAGE COOKING TIME.".
4
Press Start to begin cooking, or repeat steps 2 and 3 to set a
cooking time and power level for a third stage of cooking.
When finished, press Start.
Using the More/Less Buttons
The More/Less buttons allow you to adjust pre-set cooking times.
They only work in the Sensor Reheat, Sensor Cooking, Instant Cook,
Handy Helper, Kids Meals, Snack Bar or Time Cook modes. Use the
More/Less button only after you have already begun cooking with one of
these procedures.
1
To ADD more time to an automatic cooking procedure: Press the
More(9) button.
2
To REDUCE the time of an automatic cooking procedure: Press the
Less(1) button.
If you wish to increase/decrease in Time Cook mode by
10 seconds, press the More(9) or Less(1) button.
16
Publicité
