Bluetooth - Kenwood DPX530BT Mode D'emploi

iHeartRadio®
Search and store a station
1 Press .
2 Turn the volume knob to select a category,
then press the knob.
3 Turn the volume knob to select the desired
station, then press the knob.
When a city list appears, you can search cities in
alphabetical order by turning the volume knob
quickly.
To cancel, press and hold
(or using RC-406)
Press J / K to search for a station, then press
.
• To store a station: Press and hold one of the
number buttons (3 to 5).
• To select a stored station: Press one of the
number buttons (3 to 5).
12
BLUETOOTH®
BLUETOOTH — Connection
Supported Bluetooth profiles
– Hands-Free Profile (HFP)
– Advanced Audio Distribution Profile (A2DP)
– Audio/Video Remote Control Profile (AVRCP)
– Serial Port Profile (SPP)
– Phonebook Access Profile (PBAP)
Connect the microphone
.
Microphone input
jack
Pair and connect a Bluetooth device for the first time
1 Press
2 Search and select this unit model name (DPX53
"PAIRING" "PASS XXXXXX" Device name "PRESS" "VOLUME KNOB" scrolls on the
display.
• For some Bluetooth devices, you may need to enter the Personal Identification Number
(PIN) code immediately after searching.
3 Press the volume knob to start pairing.
"PAIRING OK" appears when pairing is completed.
Rear panel
Microphone
(supplied)
to turn on the unit.
Supported Bluetooth codecs
– Sub Band Codec (SBC)
– Advanced Audio Coding (AAC)
Adjust the microphone
angle
Secure using cord clamps
(not supplied) if necessary.
BT) on the Bluetooth device.
*