Pilot light Fonc�on
In pilot light mode or when adjus�ng the se�ngs, press
to turn it on. Choose between the 2 ligh�ng
levels by touching the key once or twice. Touch the key thrice to turn it off.
Ba�ery use
When the breast pump operates on lithium ba�ery use, the symbol
is on and dispalys the charging
level in real �me. The breast pump can operate con�nously on ba�ery about 2 hours.
When the ba�ery is almost exhausted the symbol
displays and flashes. When the charging level is
very low, the breast pump automa�cally turns off and the alarms will protect the lithium ba�ery.
The lithium ba�ery must be charged for about 4 hours. The ba�ery automoma�cally stops charging when
it's full, in order to avoid damaging itself.
To charge the ba�ery or use the breast pump with electric power
Connect the AC adapter to power supply.
The ongoing charging is visible by a bar that flashes in this logo
.
Se�ng the reminder alarm
In order to set a reminder alarm for the next pumping session, put the breast pump on pilot light mode by
long pressing the key
. When the breast pump is on standby, press the key
. Using the right bu�ons
(Speed) adjust the hours, and with these bu�ons
on the right (Power) adjust the minutes. If
there is no opera�on during 3 seconds, the selected �me will be automa�cally confirmed and the
countdown will start. Once �me is finished, an alarm will ring.
Note that this func�on operates only when the breast pump is on standby mode.
V. EXPRESSION
USING THIS BREAST PUMP
1. Turn the breast pump on by pressing the ON / OFF bu�on on top of
the breast pump.
2. Use a long press on key
to start to pump your milk. The breast
pump will start to s�mulate milk flow at a speed of 105 cycles per
minute (L3) and vaccum at level 2 (Refer to table at page 20).
3. Increase / decrease power in s�mula�on mode; Press the
bu�on.
The screen will indicate the power.
4. When the milk starts to flow.
As a reminder, the breast pump switches to the expression phase a�er 2 minutes with the speed of 105
cycles per minute and vaccum at level 3 (Refer to table at page 20).
a. Press the
bu�on to start the expression mode.
b. Adjust the power to a comfortable se�ng to start expressing milk. Choose among the 10 levels
.
The screen will indicate the op�on.
c. Adjust the breast pump speed depending on the flow of your milk and to your comfort (L6 to L1).
18