Seinbiose MOON Mode D'emploi page 15

CONNECTING THE PUMP UNIT TO MILK COLLECTION KIT
Insert the tubing connector 06 at both ends of the tubing 08 into the air
vents of the diaphragm cap 05. Insert the other side of the tubing into
right side of the pump unit 09. Ensure that the pump unit and the milk
collec�on kit are connected securely.
Note :
If you like to switch to simple pumping, simply remove le tube located
on the right side of the pump and close the hole using the plug provided.
Note:
By switching to double or simple pumping, the suc�on power will increase.
An�cipate this change in order to avoid any damage caused by aspira�on.
(Refer to Power Table on page 20). Plug the adapter into a power source.
Lithium Ba�ery Power switch:
Please turn off the bu�oon
when the pump is unused.
15