Publicité
Les langues disponibles
Les langues disponibles
PRODUCT DESCRIPTION
IV. PREPARING THE PUMP
Note
The breast pump shields are pre-assembled, but you must disassemble them a�er each use. Parts that
come into direct contact with breast milk such as the collec�on bo�le (11), the silicone pad (2), the nipple
(3) the valve (4) and the bo�le cap (16) should be cleaned before the first use and each �me you use it.
ASSEMBLING EXPRESSION COLLECTION KIT
Insert the silicone pad (2) into the nipple (3). Remember to remove the dust
cover (1) before using your breast pump.
ASSEMBLING THE BOTTLE AND BOTTLE STAND
Screw the nipple on the collec�on bo�le (11). Place the assembly on
the base (10).
14
ASSEMBLING THE DIAPHRAGM
Posi�on the ½ sphere valve (4) in the upper opening of your
breast shield. Screw on the cap (5) to prevent any air leakage.
1. Dust Cover
2. Silicone 3D flanges
3. Breast Shield Body
4. Diaphragm
5. Cap
6. Tubing Connector
7. Power Adapter
8. Tubing
9. Pump unit
10. Bo�le stand
11. Wide neck bo�le 120 ml
12. Bo�le adapter
13. Nipple
14. Disc collar
15. Nipple dust cover
16. Bo�le lid
2 PP
2 SIL
2 PP
2 SIL
2 PP
4 PP/SIL
2SIL
1
2 pp
2 pp
2 PP
2 SIL
2 PP
2 PP
2 PP
Publicité
