Seinbiose MOON PRO Mode D'emploi page 13

PRODUCT DESCRIPTION
01
IV. PREPARING THE BREAST PUMP
Assemble the breastshields beforehand (Only Seinbiose brand).
Breastshields are not supplied with the device.
A�aching the tubing and its connec�ons Connect the two
ends of the tubing to the breast shield and the breast pump.
Make sure that all parts are correctly assembled.
Note :
If you like to switch to simple pumping, simply remove le tube located on the right side of the pump and
close the hole using the plug provided.
Note:
By switching to double or simple pumping, the suc�on power will increase.
An�cipate this change in order to avoid any damage caused
by aspira�on. (Refer to Power Table on page 18).
Plug the adapter into a power source.
Lithium Ba�ery Power switch:
Please turn off the bu�oon
when the pump is unused.
13
02
1- Breastpump 1
2- A/C adapter
1