RibbOnDemand XL200 Manuel D'utilisation page 9

Please read the following instructions carefully:
Keep the equipment away from humidity
⚫
Before you connect the equipment to the power outlet, please check the voltage of the power source.
⚫
Make sure the printer is off before plugging the power connector into the power jack.
⚫
It is recommended that you connect the printer to a surge protector to prevent possible transient overvoltage
⚫
damage.
Be careful not to get liquid on the equipment to avoid electrical shock.
⚫
For safety and warranty reasons, ONLY qualified service personnel should open the equipment.
⚫
Do not repair or adjust energized equipment under any circumstances.
⚫
1
Printer Set up
1 – Connect keyboard to printer
2 - Connect the power cord to the AC adapter. Then connect the jack of the power adapter to the printer and connect the plug
of the power adapter to the socket of the wall.
2
Loading ink ribbon
Safety Instructions
User Guide RibbOnDemand® XL200 V5 FR|EN|IT|ES|PT| ©2022 copyright BUSITEL
Rear View
EN
9/32